To refresh our memory, the site is located in Peck Slip, Manhattan.
I figured it was time to begin some 3D modeling.Therefore, I decided to create a quick rough model to show it's volume.
Ideally, this modeling was produced shortly after my previous sketches.
Comments to note I received on this were:
The structures height is too generous, push higher.
The spaces can become rectilinear as suggested in the massing.
The mobius-strip or the form of "infinitude" can be shown in its structure.
The center core and circulation can be goverened by the vertical planes.
Subsequently, certain spaces can rotate as more levels are added vertically.
.
.
Next step. Work out the spaces and come up with some plans.
Also work out a general 3D composition to capture the "infinity" structure.
The way you have paraphrased the comments and set some objectives is very important. I believe that the massing is very interesting and does start to translate from your original concepts. I think by incorporating some of these ideas you can really strengthen your project. I agree with the height being too short - some areas that you want to make more pronounced should be more prominant - in height, shape...
ReplyDelete